The body posture of some models is not satisfactory. The wheels are slightly protruding after the flange plate is installed, which can make the vehicle more powerful from the appearance. A wide-body modified car will appear to have recessed tires. The flange plate can perfectly solve this problem.

What should I pay attention to when using variable speed FAG Schaeffler bearings? 1. First of all, we must understand the shape of the variable speed FAG bearings used, and the connection size of the bearings. 2, in the installation of variable speed FAG bearing should pay attention to, no matter what the final choice of installation method, must ensure that the coupling parts have size matching requirements. 3. To understand the axial positioning of the variable speed FAG Schaeffler bearing, after any one of the three rings is axially positioned, the remaining two shafts do not need axial positioning. 4. The inner and outer rings of variable speed FAG bearings adopt flat key positioning, while the middle ring adopts transmission positioning. 5. When using variable speed FAG bearings, pay attention to them

In order to ensure that the installed flange does not leak oil, what problems should be paid attention to during installation? 1. The flange shall have sufficient strength and shall not be deformed during fastening. The flange sealing surface shall be smooth and clean, and oil stains and rust spots shall be carefully cleaned during installation. 2. The gasket should have good oil resistance and aging resistance, as well as good elasticity and mechanical strength. Installation should be based on the shape of the joint selection of different cross-section and size of the gasket, and placed correctly. 3, flange tightening force should be uniform, rubber pad compression should be controlled in 1/3 left.

孔板法兰的连接方式和普通的法兰有何不同？ 就是把两个管道、管件或器材，先各自固定在一个法兰盘上，两个法兰盘之间，加上法兰垫，用螺栓紧固在一起，完成了连接。 孔板法兰是孔板流量计上将孔板连接（孔板流量计的测量部分）到管道上，两面法兰将孔板固定在中间，通过法兰上的取压点，引到差压变送器上，来测量流量。